Optec Ultra-Block System
Benefits
- Uses unique clamping system for maximum accuracy
- Compact, stable and easy-to-use desktop workstation
- Concentricity and lens thicknesses to within 1 micron
- Radial eccentricity to less than 2 microns
- Angular reproducibility to better than 1 degree
- Dual station configuration for back and front surface preparation
- Pre-defined PLC programs for blocking cycle sequences
- Adjustable timers for cooling and clamping
- Micrometer adjustment for precise wax thickness control
- Description
- Installation Requirements
- Additional Photos
- Documents
Description
The Opteq Ultra-Block System has been designed for blocking lenses with a high degree of accuracy and with a minimum of time and operator attendance.
The geometric definition of the lens is very important for patient comfort. The Ultra-Block ensures you achieve reproducible high-quality results.
Push buttons and LCD display make for easy operation and all process timers are adjustable. The controller has a service mode to support mechanical maintenance of the blocker station.
Ultra-Block is designed as an ICM (Integrated Contact lens Manufacturing) component. By attaching a bar-code reader, chuck-ID and a network connection to the ICM-server application, the complete production flow of your contact lenses can be automated and monitored.
Installation Requirements
Laboratory: |
|
| Weight | 88 lbs. (40 kg) |
| Dimensions | 19.5"W x 14"D x 25.5"H (50 cm x 35 cm x 65 cm) |
| Temperature | Air-conditioned to 68°F ±2°F (20°C ±1°C) |
Electrical Services: |
220–230 V, 50/60 Hz, single phase, 16 Amp supply |
Compressed Air: |
72.5 PSIG, delivery at 1 CFM (5 Bar, delivery at 30 litres/min) |
| Absorption dryer with 1 micrometer filter (optional) |
Additional Photos
